Feeding a Losmandy G-11Posted By ROBERT MOORE |
Wow, Lots of bad information here. The motors are 12-18v @ about 3.6 +/_ A DC they will work any where in that range and Just fine with your power supply, with 30Amp power supply in fact you can run a G11, and Atlas EQ, and an LX200 and all the dew stuff you would need for the set up's. I say this because I have.
Here is what in the Losmandy L4 Manual
"2.2.4 Power Requirements
The Gemini System requires 12–18 Volts DC, 3 Amps to operate. You will need to have
a battery or regulated DC power supply. Your choice of power supply is very important!
Many DC power units are not regulated, provide too little current, and too little or too
much voltage. This can cause problems with the Gemini. If you plan to run other
equipment from the power supply, make sure it has enough additional capacity. Choose
your power supply carefully to meet the requirements mentioned above, and avoid
potential problems such as long power cables. The Losmandy DC power supply
(available separately) meets all the above requirements."
Bob
Here is what in the Losmandy L4 Manual
"2.2.4 Power Requirements
The Gemini System requires 12–18 Volts DC, 3 Amps to operate. You will need to have
a battery or regulated DC power supply. Your choice of power supply is very important!
Many DC power units are not regulated, provide too little current, and too little or too
much voltage. This can cause problems with the Gemini. If you plan to run other
equipment from the power supply, make sure it has enough additional capacity. Choose
your power supply carefully to meet the requirements mentioned above, and avoid
potential problems such as long power cables. The Losmandy DC power supply
(available separately) meets all the above requirements."
Bob