Hi, I'm looking for suggestions for the best way to connect a Nikon CP990 (28mm thread) to a variety of telescopes. The two basic options seem to be 1) connecting the camera to the eyepiece using something like the Scopetronix digiT adapter or a dedicated eyepiece like the Scopetronix 18mm or 2) using some sort of bracket - either homemade or like the Scopetronix EZPix - to hold the camera up to the eyepiece. Although option number one has the virtue of simplicity and possibly ease of use, I am concerned about focusing relying on the camera's LCD screen. Option two seems more cumbersome, but would allow first focusing the scope and then swinging the camera into position. It doesn't seem like just holding the camera against the eyepiece works very well, at least for me. I would appreciate hearing about your experiences and any suggestions. Thanks! Dave
Digiscoping Adapters
Started by davel, 04/16/2003 02:16PM
Posted 04/16/2003 02:16PM
Opening Post
Posted 04/16/2003 09:00PM
#1
Dave,
I have a Canon digicam without threads on the lens so I tried the EZPix. I found it very difficult to a) get the camera lens correctly aligned with the eyepiece and b) to get the camera focused in that configuration. I sent it back for a refund and am now saving for a camera with threaded lens so I can use something like the DigiT adapter.
Jim
I have a Canon digicam without threads on the lens so I tried the EZPix. I found it very difficult to a) get the camera lens correctly aligned with the eyepiece and b) to get the camera focused in that configuration. I sent it back for a refund and am now saving for a camera with threaded lens so I can use something like the DigiT adapter.
Jim
Funding Member
